Amplifier Parts/Accessories

Description A single latching footswitch built for DSLH and DSL1C. With this footswitch you can easily change between the ultra gain and classic gain channels on the amp. It has indicator lights so that you can see when it is in use.

Description This is a 2-way latching footswitch for that has been made for the Origin series. The first switch will activate the gain boost available in all models to give you that added crunch. The second switch enables you to bypass your FX...

Description This 2-way momentary footswitch is perfectly created for CODE. Switch one is to scroll up through all presets and switch two is to enable you to scroll down the presets. It has built in indicator lights to guide you through which control is...

The PEDL-91009 from Marshall Amplification is an optional 4-way footcontroller for use with the Code Series amplifiers, including the Code 100H, 100, 50, and 25 models. The unit's first three switches provide quick access to recall presets, while the...

Description: Intended for use with the JVM2 series of amplifiers, the 4-Way Foot Controller from Marshall Amplification will work with your JVM210H, JVM205H, JVM215C, JVM205C, or JVM210C. It sports four fully programmable footswitches and uses a standard...

Marshall PEDL91004 Footswitch Pedal - Dual Latching Non LED

Put Your Best Foot Forward! Marshall's heavy duty PEDL-91003 footswitch will allow you to enjoy hands-free control of a wide range of your amp's functions, utilizing two dual-latching switches. Two LEDs indicate whether the switches are on or off. A...

PRODUCT CODE: 71/CONTROLLER-2 PRODUCT BRAND: Marshall MG DESCRIPTION: This 2 way foot controller (PEDL-90010) is ONLY compatible with the MG50CFX, MG101CFX, MG102CFX & MG100HCFX units. The controller is supplied as standard with those compatible...

Made for the MGFX Series Marshals with Built in Effects, this 4 button footswitch gives the MGFX user control over the Channel, overdrive, tap tempo and tuner switches on the front panel or 4 completely independent presets. Switch between Clean/Crunch,...

Put Your Best Foot Forward! Marshall's heavy duty PEDL-91003 footswitch will allow you to enjoy hands-free control of a wide range of your amp's functions, utilizing two dual-latching switches. Two LEDs indicate whether the switches are on or off. A...

Fivefold Footswitch with LED, 8m cable, 3 buttons & 2 switch original name. Bolted steel housing, bend protection and cable entry, 6-pin DIN connector, labeled "Clean - Chrunch - Lead - Reverb - FX". PEDL10021 (formerly FS -05D)Dimensions (mm): 134 x...

This is the versatile Marshal JMP-1 Tube Guitar Preamp.  Predominately used in home studio.  Has only been out for a hand full of gigs over several years.  Comes with Marshall MPM4E Four button footswitch for changing between four patches...