Darkglass
Darkglass MULTI DISTORTION COMPRESSOR
- SKU:
- ADAM
- UPC:
- 6.43005E+12
- Condition:
- New
- Availability:
- Please Call - 1-855-643-2787
- Shipping:
- Calculated at Checkout
Description
Description
The Aggressively Distorting Advanced Machine is the result of a collaboration with one of the most celebrated artists in today’s metal scene - Adam "Nolly" Getgood. This pedal captures Nolly’s entire tonal arsenal meticulously refined by years of in-depth testing and experience in one striking enclosure.
ADAM has three fully programmable rotating footswitch presets. Each of these stores your unique blend of compression, distortion, impulse responses, EQ parameters, and signal chain settings. Featuring a unique and innovative top-notch precision touch slider interface, for its 6-band programmable EQ.
It also incorporates a USB-C audio interface and balanced stereo outputs for studio monitors and is equipped with an extra accurate chromatic tuner, that also works well with down-tuned guitars and basses.
Compression
Controls the amount of input gain to the compressor and intelligently applies the correct amount of makeup gain so that your signal is always driven at the appropriate level, no matter how much compression is applied.
Drive
Adds distortion and drive to your signal. Crank this knob to apply Nolly’s favorite vintage distortion to the distorted part of the signal chain.
Character
Changes the tone of the distortion, adding brightness to the distortion signal.
Blend
Mixes between the distortion signal and the clean sidechain signal
Level
Controls the master volume of ADAM.
Touch Sensitive Sliders
Each slider has a -12 dB to 12 dB range. From left to right, the frequency bands for each slider correspond to a low shelf, 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, and a high shelf.
Input
This is the primary instrument input on ADAM. Connect your instrument or output from your pedal board to the 1/4” mono jack.
Aux In
The stereo input of ADAM enables the playback of backing tracks while practicing or recording. Connect your mobile phone, laptop etc. to the 1/8” stereo jack.
Headphone Output
The headphone output can handle headphones with an impedance of 16 - 600 ohms. Connect your headphones to the 1/8” stereo jack and set the desired level from the dedicated potentiometer next to the jack.
Balanced Outputs
The two balanced outputs add routing versatility and the option of using ADAM as a fully equipped audio interface.
Direct Output
An XLR output with a ground lift switch provides a reliable standard connection to a mixing desk or an external audio interface for a guaranteed low-noise signal.
MIDI In
A standard 1/8” TRS jack allows connecting an external MIDI controller to ADAM for even more flexibility.
USB
The USB-C port unlocks ADAM’s USB audio interface capabilities and enables interaction with the Darkglass Suite desktop app, allowing for software updates and access to the Darkglass IR library, containing hundreds of cabinet simulations.
Dimensions
18*12*6 cm | Weight 0.7 kg
WARNING
The ADAM has a current draw of 500mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty
Related Products
Darkglass Hyper Luminal Hybrid Compressor
Darkglass
Electro-Harmonix BASS METAPHORS Preamp/EQ/Distortion/Compressor/DI Multi-Effect 9.6DC-200 PSU included
Electro-Harmonix
Darkglass Microtubes X
Darkglass
Darkglass Alpha Omega
Darkglass
Darkglass Alpha Omicron
Darkglass
Darkglass HARMONIC BOOSTER
Darkglass
Darkglass Duality Fuzz
Darkglass
Darkglass DG410NE COVER
Darkglass
Darkglass Vintage Microtubes
Darkglass