Traynor YCV40 Custom Valve 40 Watt Combo Amplifier

This amplifier is in excellent condition, but has some scuffing on the sides and front.

The first guitar amp that brought the Traynor name back into the world of modern tube amps was the YCV40, and it continues on today. Real tube overdrive is provided by three 12AX7WA dual triode preamp tubes while real tube power is provided by two 5881WXT beam power tubes. The internal gadgetry in this channel switching amp provides good flexibility, but makes it very easy to get a great tone. The combination of the tube power and the Celestion speaker is magical. The three basic tones (clean, crunch and overdrive) are easily defined. With great tone at low levels, and shine and punch at full tilt, the Custom Valve 40 has received rave reviews for over 10 years, including Guitar Player magazine's Editor's Pick Award in 2001.

Although signal-to-noise is not normally a specification that is discussed where guitar amplifiers are concerned, the ultra-quiet Custom Valve 40 makes it an issue. Experienced professional users will appreciate the auto-matching tube circuit that maintains bias balance as tubes age ensuring hum free performance. Listen carefully. Although the YCV40 has a tremendous amount of gain it remains virtually hum free.

The rear mounted control panel is easy to access, yet recessed for protection. And the warranty? Yorkville's standard two year (even if you break it!) transferable warranty*. The one that made Traynor famous in the sixties.

Specifications:

Type: Tube Guitar Amplifier

Cabinet Impedance (Ohms): 8

Power @ min. impedance (Watts): 40

Minimum Impedance (Ohms): 4

Speaker Configuration - LF (Size / Power): 12 inch / 40 Watts

Inputs 2

Channel 1 - Inputs: 1/4 inch phone

Channel 1 - Controls: Gain, Volume, Treble, Bass, Middle

Channel 1 - Switches: Boost

Channel 2 - Inputs: Shares ch 1 input

Channel 2 - Controls: Volume, Treble, Bass, Middle

Channel 2 - Switches: Channel Select, Brightness

Channel Switching: Yes

Main Tone Controls: Presence

Line Out: (type / configuration): 1/4 inch TRS / Rear (Effects Send)

Effects Volume: Yes

Effects Loop / Location: Yes / Rear

Effects Footswitch / Function: Yes / Channel Select, Boost

Internal Reverb / Effects: Spring Reverb

LED Indicators: Channel Select, Boost, Power, Standby

External speaker output / location: 1/4 inch / Rear

Other Features:

• Standby Switch - Activates standby mode to keep the tubes warm while the amp is not in use.

• Auto Tube-matching Circuit

• Preamp Tube - 3x 12AX7WA Dual Triodes (Russia)

• Power Amp Tube - 2x 6L6GB Beam Power Tubes (Russia)

• DC filaments on preamp tubes eliminate hum

• Fully regulated power supply with tube rectifier emulation

• Perforated Steel Grille

Dimensions (DWH, inches): 9.5 x 23 x 18

Dimensions (DWH, cm): 24 x 58 x 46

Weight (lbs / kg): 45 / 20.4